Device Specifications
- Part number: WFRUN1
- Dimensions: 72x38x58 in // 183x97x148 cm [LxWxH]
- Deck height: 12 in // 30 cm neutral, 18 in // 46 cm at max incline
- Belt area: 60x22 in // 152x56 cm
- Device shelf holds up to a 17 in // 43 cm laptop, weighing up to 15 lbs // 6.8 kg
- Weight: 275 lb // 125 kg
- Connectivity: Bluetooth FTMS, Direct Connect, and Wi-Fi
- Wireless software updates: Yes
- Compatible devices: iOS, Android, PC (MacOS and Windows)
- Max user weight: 250 lbs // 113 kg
- Power Requirements: 120V, dedicated 15A circuit
- Charging capacity: 1x USB-C 24W charging port
- Max belt speed/pace: 4 min/mile (15 mph)
- Max deck incline: 15%
- Min deck decline: -3%
Requirements
Power
- A dedicated 120 Volt, 15 amp circuit and non-GFI/GFCI outlet/breaker
- a 20 amp circuit with or without GFCI is also acceptable
- A direct connection between the treadmill and that wall outlet
Space
- Surface area of the KICKR RUN
- 176 x 86 in / 4.5 x 2 m [length x width]
- Recommended open space around the treadmill (based on ASTM standard recommendation for safe operating space )
- 80 in / 203 cm immediately behind the treadmill
- 24 in / 61 cm on each of the three other sides
- Vertical clearance for 24 in / 61 cm greater than the height of your tallest intended user
For more details, see Power and space requirements for KICKR RUN.
Connectivity
- Required for setup and firmware updates
- Wi-Fi or a cell > Wi-Fi hotspot (2.4GHz, channels 1-13)
- cell
- Required for connected general use
Setup
The KICKR RUN is delivered and installed in the room of your choice by a team of professional installers. Setup is completed in the Wahoo app for iOS or Android by scanning the QR code on the front of the console.
For more details, see KICKR RUN Setup.
Features
For more details, see KICKR RUN Features.
Physical Features
- Manual controls
- Speed and grade multi-stage paddles
- RunFree button
- 3x contextual app interaction buttons
- Stop button
- Power switch
- Time of flight sensor
- 2x standard water bottle holders
- Laptop shelf with integrated tablet/phone holder (holds up to a 17 in // 43 cm laptop, weighing up to 15 lbs // 6.8 kg)
Safety Features
KICKR RUN offers a variety of safety features intended to prevent unintended belt movement and stop the belt immediately in the case of a fall.
- Safety key (emergency stop)
- Stop button
- Time of flight sensor
- Impact-based cadence detection
For more details, see KICKR RUN Safety Features
Control Modes
Manual Control mode
The KICKR RUN supports traditional treadmill manual speed and grade control using the multi-stage control paddles.
For more details, see Manual control mode [RUN].
RunFree mode
RunFree mode is a button-selected mode that allows you to run freely, naturally changing pace and stride without having to manually adjust the KICKR RUN's belt speed. The KICKR RUN will automatically change the belt speed to match your pace and stride changes, keeping you in the middle of the deck.
For more details, see RunFree mode [RUN].
Planned (structured) Workout mode
The KICKR RUN offers automatic belt speed and grade adjustments when used with structured running workouts with dynamic pace and grade targets in the Wahoo app.
For more details, see Planned workout mode [RUN].
Other features
Auto-leveling
The KICKR RUN will automatically level the deck horizontally at startup using the linear actuators used for grade changes to accommodate slightly uneven floors and prevent the it from shifting while in use.
Terrain mode
The KICKR RUN can be set to slightly adjust the horizontal camber of the deck intermittently to simulate the variability of an outdoor running surface and mitigate the repetitive motion fatigue of running on a treadmill.
For more details, see Terrain simulation mode [RUN].