KICKR v1-5, CORE, and SNAP LEDs
Red LED:
- Always on (indicates power)
- Flashes quickly when ANT command/data is received
Blue LED:
- Blinks once per second when disconnected and advertising Bluetooth
- Solid when connected via Bluetooth, blinks quickly during information transfers
- Flashes quickly when connecting to a device via Bluetooth
Auto LED Sleep:
As of October 13, 2021, fully updated KICKR v4 (2018) + , CORE, and MOVE LEDs will turn off after 15 minutes of inactivity. Flywheel movement or activating a Bluetooth connection will re-activate LEDs.
KICKR v6 and MOVE Wi-Fi LEDs
- What is it? A white LED that indicates the WiFi connectivity status of the trainer.
- Why is it needed? Similar to Bluetooth LED, it helps the user quickly understand the connection status of the trainer.
-
How does it work? The led will slow blink white when searching for a network. Fast blink means it’s discovered the network and working to connect. Solid white means the trainer has a good connection to the network.
CORE 2 LEDs
The CORE 2 has two sets of LED lights to provide more information on the trainer's status to users.
Connection Status (upper LEDs)
Connection |
Light Color / Pattern |
|---|---|
No Connection |
Off |
Single Bluetooth |
1x blue pulse + off , breathing cycle |
Dual Bluetooth |
2x blue pulse + off breathing cycle |
Triple Bluetooth |
3x blue pulse + off breathing cycle |
Single WiFi Connection |
1x white pulse + off breathing cycle |
Bluetooth + WiFi |
1x blue pulse + 1x white pulse + off breathing cycle |
Dual Bluetooth + WiFi |
2x blue pulse + 1x white pulse + off breathing cycle |
ANT+ |
Red blinks whenever ANT+ control received |
Ready to Ride Status (lower LEDs)
State |
Color / Pattern |
|---|---|
Boot (turning on the trainer) |
Yellow (quick flash) |
Idle |
Green (solid) |
Powered on, flywheel turning |
White (solid) |
Undefined error |
Red (blinking) |
Zwift paired |
Orange (solid) |
Zwift Virtual Shifting enabled |
Purple (solid) |
During a Firmware Update
These lights will occur on both the upper and lower LEDs when a firmware update is needed.
State |
Color / Pattern |
|---|---|
Boot |
Yellow (quick flash, lower only) |
Downloading |
Yellow (upper and lower pulsing together) |
Error while downloading |
Yellow + Alternating (upper and lower alternating pulses) |
Validating |
Purple (solid, upper only) |
For more information, see this article.