How to replace the RFLKT battery

NOTE: Remove the RFLKT from the bike mount before attempting to change the battery.

1 Using a small philips head screwdriver, remove the screws securing the back casing

of the device.

TIP: To help ensure none of the screws go missing during this process, we

suggest that you always change the battery on a flat (preferably white) surface

for best visibility. e.g. Place a sheet of blank white paper on a table.

2 Replace the dead battery with a new CR2450 coin cell battery.

3 Replace the screws, making sure the black rubber O-ring is seated properly in the

casing before tightening. The RFLKT will not be water resistant if missing or seated

improperly.